Triax DVB 63S - Manual (Page 7)

7
Connection to a TV set
By means of a SCART cable:
To have the best possible picture quality you should connect re-
ceiver and tv by means of a SCART cable.
Procedure:
g
Connect receiver (SCART-socket tv) and tv (SCART-socket)
by means of a SCART-cable. If your tv is equipped accord-
ingly, this will automatically shift to AV and thus to satellite
reception when switching on the receiver.
By means of a HF cable:
If your tv is not provided with a SCART-socket, the receiver must
be connected to the aerial input of the tv. When using this type of
connection, the sound can only be reproduced in mono.
To connect HF cable, proceed as follows:
h
Connect the receiver (HF-output) with a suitable tv-connec-
tion cable to the aerial input of the tv. The cable coming
from the terrestrial aerial is connected to the Input terres-
trial aerial of the receiver.
c Having made all connections, you connect the receiver by
means of the power supply cable delivered with the receiver
to a 230V/50 Hz wall outlet. Now switch on the receiver by
pressing the “standby” or “Numeric” buttons.
Now tune in your tv to the transmitter channel of the receiv-
er. Select a free program place on the tv and set it to chan-
nel 38 (see the user manual of the tv, if necessary).
If you don't get a clear picture on channel 38, this or an
adjacent channel could already be occupied by a program
which you receive by means of the aerial. You can check
this by disconnecting for a very short time the aerial cable
from the connector Input terrestrial aerial of the receiver. If
you thus for a short time get a clear picture, you should set
another transmitter channel in the range 21 to 61 for the re-
ceiver.
S E T- U P A N D C O N N E C T I O N S