TP-Link RX-7-248 - Manual (Page 35)

(Fig. 26)
3. Remove the two binding screws on each module. Put your fingers in the two holes on the top
and bottom of the module and lift the module straight up to remove it from the cabinet.
* When putting the module back into the cabinet, align it along the guides of the frame, making
the connector on the rear of the module mate with the connector in the cabinet.
* Assemble each module into the cabinet in the reverse manner of removing modules.
Insert each module by fitting it into the guide hole in the base
plate of the console unit.
Use fingers to lift up the module.
— 34 —