TP-Link RX-7-248 - Manual (Page 6)

PROGRAM MODULE
1. Group 1, 2, 3 and 4 controls pick up the signal from the four group out busses and
assign them to the program output. The program output is therefore suitable for
feeding the signal to the house sound system.
2. Program On/Off pushbutton determines whether the individual program output
signal is to be fed to the rest of the sound system or other equipment.
3. Peak indicator for detecting overload condition.
4. Program channel mixed signal can be monitored through headphones by phones
selector switches (L and/or R) prior to feeding the signal to the rest of the sound
system or other equipment.
PHONES MODULE
1. Foldback 1 or 2, Echo 1 or 2, Program L and R, Air Monitor L and R can be
monitored through headphones by a cluster of selection switches.
2. Air Monitor L and R inputs are provided with PHANTOM power ON/OFF switch.
3. L and R monitor output jacks are located on the rear for monitor loudspeakers
(power amplifiers).
TALKBACK MODULE
1. Oscillator/Pink noise Generator includes 400Hz, 1kHz and 10kHz sine wave
signals and pink noise for signal tracing, tape machine alignment, sound system
setup or trouble shooting purposes.
2. These signals can be fed to all mixing busses except the cue buss.
— 5 —