Creating groups, 7 − md editing, Deleting groups – Tascam MD-02 User Manual
Page 29
TASCAM MD-02/MD-02B
29
2. Press the
EDIT
key on the main unit or the remote
control.
3. Use the
MULTI JOG
dial on the main unit or the
+/–
keys on the remote control to select “MOVE?”
4. Press the
MULTI JOG
dial on the main unit or the
ENTER
key on the remote control.
“Move xxx > ###” is shown on the display. (The track
number to be moved is “xxx” and the destination track
number is “###.”)
5. If necessary, use the
Ô/
keys on the main unit
or the
SEARCH
(
Ô/
) keys on the remote control
to change the number of the track to be moved if
necessary.
6. Use the
MULTI JOG
dial on the main unit or +/– keys
on the remote control to select the destination track
number.
7. Press the
MULTI JOG
dial on the main unit or the
ENTER
key on the remote control.
“Sure?” appears.
8. Press the
MULTI JOG
dial on the main unit or the
ENTER
key on the remote control to move the track.
“Complete” appears on the display when moving is
finished.
NOTE
After moving a track other track numbers are adjusted
accordingly.
Creating groups
With this deck, tracks on a single disc can be divided into
groups and played back as groups (see “Group playback”
on page 21).
To create a group, the numbers of the first track and the
last track in the group are designated.
1. When stopped, press the
EDIT
key on the main unit
or the remote control.
2. Use the
MULTI JOG
dial on the main unit or the
+/– keys on the remote control to select “GRP
CREATE?”
3. Press the
MULTI JOG
dial on the main unit or the
ENTER
key on the remote control.
“ST Trk> 1” is displayed.
Select the start track (first track in the group) when
this is shown.
4. Use the
MULTI JOG
dial on the main unit or the +/–
keys on the remote control to select the desired start
track.
5. Press the
MULTI JOG
dial on the main unit or the
ENTER
key on the remote control.
“ED Trk> ###” is displayed.
Select the end track (last track in the group) when this
is shown.
6. Use the
MULTI JOG
dial on the main unit or the +/–
keys on the remote control to select the end track.
7. Press the
MULTI JOG
dial on the main unit or the
ENTER
key on the remote control.
“Sure?” appears.
8. Press the
MULTI JOG
dial on the main unit or the
ENTER
key on the remote control to create the
group. “Complete” appears on the display when the
operation finishes.
NOTE
When a group is created, it is assigned a group
•
number.
Group numbers are assigned in the order of track
•
numbers.
A track cannot be included in more than one group.
•
CAUTION
When using the MD-02/MD-02B, even if a group is
created, the disc title display does not change. However,
internally, the real disc title is changed automatically to
a disc title that includes group information and group
names.
For example, if the disc title is "My Best" and the group
with tracks 1–4 is called "Jazz," while the group with
tracks 5–8 is called "Latin," a disc title is created as
follows.
0; My Best//1–4; Jazz//5–8; Latin//
In the above example, if there were no assigned disc or
group titles, the disc title would be created as follows.
0;//1–4;//5–8;//
If a disc with groups created in an MD–02 is loaded into
an MD–350 or MD–CD1MK2, for example, the disc title is
displayed as above.
Deleting groups
Use the following procedures to delete a group.
1. When stopped, press the
EDIT
key on the main unit
or the remote control.
2. Use the
MULTI JOG
dial on the main unit or the
+/–
keys on the remote control to select “GRP
CANCEL?”
3. Press the
MULTI JOG
dial on the main unit or the
ENTER
key on the remote control.
“Group No> 01” is displayed.
7 − MD Editing