Texas Instruments 60X - Manual (Page 104)

6-20 Field Service
4. Remove the Fan Assembly.
5. Replacement is the reverse of Steps 1 through 4.
Figure 6-17 Internal PWB Assemblies, Removal/Replacement (65x Series)
6.5.12 Removing/Replacing the LED Board (65x Series)
1. Remove the Top Cover Assembly as described in Paragraph 6.5.10.
2. Disconnect the LED cable from the Main Board (refer to Figure 6-17).
3. Remove the screw holding the LED Board and remove the LED Board
Assembly.
4. Replacement is the reverse of Steps 1 through 3.
FIR/Audio
Cover
Battery Board
Cable
LED Board
Cable
Fan
Assembly
Battery
Board
LED Board
Assembly