Texas Instruments 60X - Manual (Page 108)

6-24 Field Service
and 6.5.11 respectively.
2. Separate the inside frame assembly from the base assembly.
3. Refer to Figure 6-21 and remove the following connectors:
—Battery Connector Board Cable J21
—Speaker Cables J12 and J13
—Cover Closed Switch Cable J14
Figure 6-21 Unplugging Cables on 60x Series Motherboard
4. Refer to Paragraph 6.5.13 and remove the Power Supply Board Assembly.
5. Remove the four screws that secure the motherboard to the inside assembly
frame. Pull up on the Motherboard Assembly to release it from the inside
assembly frame (refer to Figure 6-22).
J21
J12 J13
J14