Texas Instruments 60X - Manual (Page 90)

6-6 Field Service
6.5.2 Removing/Replacing PCMCIA Options
The procedure for removing and replacing the PCMCIA options is as follows:
1. Turn off the computer and remove the battery pack as described in Paragraph
6.5.1.
2. Press the upper card eject button to eject the upper card, lower button
controls the lower card and use both buttons for Type III devices.
3. To replace the PCMCIA device, remove any filler cards present and insert the
device. Reinstall any external cabling required for the device.
Figure 6-3 Installing/Removing PCMCIA Options
One or two Type
I/ II PCMCIA Option
Cards or one Type III
Option Card
PCMCIA Release
Buttons