Tally Genicom Tally Mono Laser 9025N - Manual (Page 172)

P RINTING F ROM DOS A PPLICATIONS C.9
C
PCL Tab
In this tab, you can configure various settings for PCL emulation.
• Typeface allows you to select the desired typeface. This
setting is ignored when the software application specifies a
font.
• Symbol Set determines the symbol set. A symbol set is a set
of alphabetic and numeric characters, punctuation, and
special symbols used when printing with a selected font.
• Pitch sets the font pitch (only if you have selected a scalable
monospaced font). Pitch refers to the number of fixed-space
characters in one horizontal inch of type.
• Point Size sets the font point size (only if you have selected
a scalable typographic font). Point size refers to the height of
the characters in the font. One point equals approximately
1/72 of an inch. You can select point sizes from 4.0 to 999.75
in increments of 0.25 points.
• Lines Per Page sets the number of lines that print on each
page. The setting can range from 5 to 128 lines per page.
• Courier determines the courier font type; Regular or Dark.
• Font List prints a font list showing all the fonts available for
PCL emulation.