Tally Genicom Tally Mono Laser 9025N - Manual (Page 52)

U SING THE C ONTROL P ANEL 3.11
3
3
Duplex Margin
In this menu, you can set the margin of print
materials for double-sided printing.
• Top Margin: Set the top margin, from
0.0 to 9.9 mm.(increasing by 0.1mm)
• Left Margin: Set the left margin, from
0.0 to 9.9 mm.(increasing by 0.1mm)
• Short Binding: Set the bottom margin of
the rear side for short binding, from 0.0 to
22 mm.(increasing by 1mm)
• Long Binding: Set the right margin of
the rear side for long binding, from 0.0 to
22 mm.(increasing by 1mm)
Simplex Margin
Set the margin of print materials for
one-sided printing.
• Top Margin: Set the top margin, from
0.0 to 9.9 inches.
(increasing by 0.1 inches)
• Left Margin: Set the left margin, from
0.0 to 9.9 inches.
(increasing by 0.1 inches)
Copies
Set the default number of copies by
selecting any number from 1 to 999.
Item Explanation
Values: Top/Left:5.0* , Short/Long: 0*
Values: 0.0*
Values: 1* ~ 999