Tally Genicom Tally Mono Laser 9025N - Manual (Page 55)

U SING THE C ONTROL P ANEL 3.14
Auto Continue
This item determines whether or not the
printer continues printing when it detects the
paper mismatching to your paper setting.
• Off: If the paper mismatch occurs, the
message will remain on the display and the
printer will remain off-line until you insert
the correct paper.
• On: If the paper mismatches, an error
message will display. The printer will go
offline for 30 seconds and automatically
clear the message and continue printing.
Jam Recovery
This item determines how the printer
behaves when a paper jam occurs.
• Off: The printer does not reprint pages.
Printing performance might be increased
with this setting.
• On: The printer automatically reprints
pages after you clear the paper jam.
Altitude Adj.
You can optimise the print quality depending
on the air pressure, such as in a high ground.
Auto CR
This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
Item Explanation
Values: Off, On*
Values: Off*, On
Values: Low*, High
Values: LF*, LF+CR
LF LF+CR
AA
BB
CC AA
BB
CC