Thermador POD 302 - Manual (Page 19)

English 15
Stop Time Use STOP TIME to delay the start of a timed mode. Enter the desired time for the
mode to end. The oven calculates the proper start time. It starts and stops auto-
matically.
Note: a separate digital clock must be set before starting Stop Time. This is indi-
cated by "CLOCK TIME" in the display.
To set the Clock Time and Stop Time:
1. Set the Cook Time as described in "Cook Time".
2. Press SELECT.
"CLOCK TIME" and the flashing Clock Time numbers appear in the display.
3. Use the "+" and "-" buttons to set the Clock Time (sets the current time of the
day).
4. Press SELECT.
"CLOCK TIME" disappears and "STOP TIME" appears.
5. Use the "+" and "-" buttons to set the Stop Time.
Example: Stop Time is at 12:00:
The numbers stop flashing after a few seconds and the oven enters delayed mode.
The oven turns on when it is time to start.
The oven turns off and a beep sounds at the end of the programmed time. Press
"+" and "-" simultaneously, or open the oven door to clear.
Note:
• Stop Time cannot be used if a temperature probe is in use.
• The maximum Stop Time is 11:59 hours.
m
Caution:
To maintain food safety, do not leave food in the oven for more than
one hour before or after cooking.