Thermador POD 302 - Manual (Page 41)

English 37
Data Plate The data plate shows the model and serial number. Refer to the data plate on the
appliance when requesting service. The data plate location is shown in the follow-
ing picture.
How to Obtain Service
or Parts To reach a service representative, see the contact information at the front of the
manual. Please be prepared with the information printed on your product data plate
when calling.
Control does not react when a key is
touched. Be sure that pad is clean. Touch the center of the touchpad. Use the flat part
of your finger.
Fan is running during modes that do not
use convection On some models, the convection fan runs while the oven is preheating for
the bake mode. This is normal.
Warm air or steam escapes from oven
vent. It is normal to see or feel steam or warm air escaping from the oven vent.
Do not block the vent.
Cooling fan runs even when the oven is
turned off. This is normal. The cooling fan will continue to run, even after the oven has
been turned off, until the oven has cooled sufficiently.
Oven Problem Possible Causes and Suggested Solutions
Data Plate