TANDBERG 550MXP - Manual (Page 123)

Administrator Settings
113
Wide screen VGA or TV monitor In Wide (native) mode.
VGA Out Quality*
The supported range of VGA formats will be optimized for the VGA display monitor based on the
source image.
VGA Out Quality enables the user to change the preferred format for the DVI/VGA output. It is
recommended to keep this setting in Auto unless your screen doesn
’
t support some of the XGA
or SVGA formats the system is using. Note that the VGA Out port support VESA Power
Management.
Auto VGA output format will be optimized dependant of the video source format,
refresh and of the EDID information available.
Supported formats are:
SVGA (800x600) 75Hz
XGA (1024x768) 60Hz / 75Hz
WXGA (1280x768) 60Hz
SVGA 800x600
75Hz VGA output format is forced to SVGA format (800x600) 75Hz
XGA 1024x768
60Hz VGA output format is forced to XGA format (1024x768) 60Hz
VGA Out Quality for Wide XGA:
If VGA Monitor Format is set to Wide, PC Picture Format is set to Normal, VGA Out
Quality is set to Auto, the layout on the monitor is either fullscreen or POP, and the
input source to the largest window is PC with resolution 1024x768, the system will use
WideXGA (1280x768) instead of XGA, when the monitor supports this.
PC Picture Format (wide screen monitors only)
PC Picture Format setting only takes effect when TV or VGA Monitor Format is set to Wide. Use
this setting to determine if you want your PC presentations to be shown stretched in full screen,
or with correct aspect ratio using part of the widescreen display. With the VGA Out Quality set to
Auto the presentation will be of the best possible quality supported by the monitor.