TANDBERG 550MXP - Manual (Page 19)

Installation
9
2.2 Connecting Cables
1. Microphone cable

Connect the microphone to the microphone cable.

Connect the microphone cable to microphone input 1 on the system.
2. Monitor cable(s)
Scart (Europe):

Connect the Scart adapter to one of the Scart connectors on your monitor.
Scart (Europe) & RCA/S-Video (US):
Audio:
The cable with one RCA connector on one side and two RCA connectors on the other side:

Connect the two RCA connectors to your monitor (or Scart adapter) Audio Left/Right
connectors (the audio signal from the system is a monaural signal and therefore is fed
into both audio-in sockets on the monitor).

Connect the other end to
‘
Audio Out
’
.
Video:

Connect the S-video cable to the S-video connector on your monitor (or Scart adapter).
If you do not have an S-video connector on your monitor, connect the RCA-RCA video
cable to the RCA connector on your monitor.

Connect the other end to
‘
Video Out
’
.
Connecting with scart
Connecting without scart