General use, Adjusting volume, View outgoing video (selfview) – TANDBERG 550 User Manual
Page 17: Microphone on/off, Speaker on/off
TANDBERG 1000/550 for Cisco
CallManager
17
General use
mic off
Microphone on/off
To mute your microphone, press M
IC
O
FF
. An on screen indicator will appear.
Press M
IC
O
FF
to activate the microphone again.
Speaker on/off
To switch off your speaker in a call, press the push-button at the front of the system. An indicator will appear. The
headset output, marked ‘Audio out’, on the back of the system will then provide the audio of the system. The
push-button can also be used to accept a call.
move pip
General Use
Adjusting Volume
Press the V
OLUME
keys to adjust the volume level. An on-screen indicator will show the current level.
View Outgoing Video (Selfview)
Press the S
ELFVIEW
key to view your outgoing video.
To change the image being viewed on the monitor during a call press S
ELFVIEW
once.
Press M
OVE
PIP to move your selfview as a Picture-in-Picture to different corners of the screen or to
switch it off.
+
-
selfview