TANDBERG 550 - Manual (Page 23)

TANDBERG 1000/550 for Cisco  CallManager
23
Advanced Use
Call Status
In the Call Status menu, various information about the current call is shown. The information is given both for the
transmit and receive direction. The picture below shows a sample output from this menu.
System Status
In the system status menu you find information such as:
- IP address of your unit.
- IP-subnet mask
- Gateway
- DHCP server
- DNS domain name
- Current software version
- TFTP server address
- Active and backup call managers.
- URLs for Information, Directories, Messages and Services
- Serial number of your unit
- MAC-address of your unit
- Ethernet speed
U SE THE U P AND D OWN NAVIGATION KEYS
ON THE REMOTE CONTROL TO SCROLL UP
AND DOWN PAGES IN THE MENU
TIP
OK