TANDBERG 550 User Manual
Page 26
26
TANDBERG 1000/550 for Cisco
CallManager
Advanced Use
IP-address
IP-address defines the network address of the codec. This address is only used in static mode. In DHCP-mode,
the assigned IP-address can be found on the View Status menu
IP-subnet mask
IP-subnet mask defines the type of network. This address is only used in static mode. Your system administrator
will provide the correct value for this field.
Gateway
When using DHCP, the default gateway will be set automatically. If the LAN utilizes static IP addresses, IP
address, subnet mask, and default gateway must be specified by the LAN administrator.
Ethernet Speed
Auto
The codec will auto-detect the speed/duplex on the LAN.
10/Half
The codec will connect to the LAN using 10Mbps speed/Half Duplex.
10/Full
10 Mbps speed/Full Duplex.
100/Half
100 Mbps speed/Half Duplex.
100/Full
100 Mbps speed/Full Duplex.
Restart
Pressing the Restart softbutton will restart your system. If IP-assignment is changed, it is sufficient to use this
softbutton to restart the system.