Texas Instruments TMS320C6202 - Manual (Page 69)

TMS320C6202
FIXED-POINT DIGITAL SIGNAL PROCESSOR
SPRS072B – AUGUST 1998 – REVISED AUGUST 1999
69
POST OFFICE BOX 1443
•
HOUSTON, TEXAS 77251–1443
DMAC, TIMER, POWER-DOWN TIMING
switching characteristics for DMAC outputs † (see Figure 46)
NO. PARAMETER
’C6202-200
’C6202-233
’C6202-250
UNIT
MIN MAX
1 tw(DMACH) Pulse duration, DMAC high 2P – 3 ns
† P = 1/CPU clock frequency in ns. For example, when running parts at 250 MHz, use P = 4 ns.
DMAC[3:0]
1
Figure 46. DMAC Timing
timing requirements for timer inputs † (see Figure 47)
NO.
’C6202-200
’C6202-233
’C6202-250
UNIT
MIN MAX
1 tw(TINPH) Pulse duration, TINP high 2P ns
2 tw(TINPL) Pulse duration, TINP low 2P ns
† P = 1/CPU clock frequency in ns. For example, when running parts at 250 MHz, use P = 4 ns.
switching characteristics for timer outputs † (see Figure 47)
NO. PARAMETER
’C6202-200
’C6202-233
’C6202-250
UNIT
MIN MAX
3 tw(TOUTH) Pulse duration, TOUT high 2P – 3 ns
4 tw(TOUTL) Pulse duration, TOUT low 2P – 3 ns
† P = 1/CPU clock frequency in ns. For example, when running parts at 250 MHz, use P = 4 ns.
TINPx
TOUTx
4
3
2
1
Figure 47. Timer Timing
ADV
ANCE INFORMA
TION