Tyan Computer S1854 - Manual (Page 74)

http://www.tyan.com
74
Appendix 2
Retention Module installation
Appendix 2
Retention Module Installation
Installing SECC2 CPUs -Option 1
The following are alternative methods of installing the CPU and retention
module to that of chapter 2. On both sides of the SECC2 CPU reside the lower
tabs of the aluminum heat sink (see Figure A below). These tabs should snap
into the retention module. Currently, the retention module recommended for
securing the SECC2 CPU is included in the motherboard package. The reten-
tion brace consists of a foldable bracket that secures the CPU. (See Figure B
on the following page)
Lower Tabs
Figure A