Tyan Computer S1854 - Manual (Page 77)

S1854 Trinity 400
77
Figure E
Top Clip
Side Braces
Installing SECC2 CPUs - Option 2
Another method to secure an SECC2
CPU is by using the Universal
Retention Module (also provided by
Tyan). The universal retention
module is designed to accommodate
most versions of the Pentium
Celeron CPUs. Included in this
solution is an overhead clip to lock
the CPU into its slot along with the
side universal braces. See Figure E
(above) for the universal retention
module components. Install the
CPU, place the two side braces
at the ends of the CPU slot (see
Figure F left). The screws on
the motherboard should fit
through the holes of the
retention braces. Tighten and
secure both braces using a
screw driver. Next, carefully
insert the CPU between the
braces
and onto the CPU slot (see
Figure G below). Make sure the
CPU fan faces towards the
center of the motherboard.
When the CPU is secured
onto the slot, take the
overhead clip and insert
the ends of the clip over
the top of the side braces
(See Figure H on the
following page).
You will hear a ‘click’
when the overhead clip is
fitted securely into the
side braces.
Figure F
Figure G
RETENTION