Targus netlink e340 - Manual (Page 14)

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
3.5 Wireless Telephone Displays
Status
display
Displays information from the PBX in one line of text and displays
available softkeys on the second line.
Muted is displayed when local
muting is activated. The PBX text may be truncated as the 5220 IP phone
has 20 characters and the Wireless Telephone display area is 18
characters.
LINE display Pressing the LINE key from the active mode displays a list of line
appearances extracted from the programmable keys list. The line
appearances are also mapped to corresponding line icons. If more than
nine lines are mapped to a handset, the remaining line appearances will
show up on the
FCN list.
Menu display Pressing the MENU key from the active state displays the descriptive text
of four softkeys. The first three are defined by the PBX. The fourth key is
normally the Superkey, but changes to HOLD when audio is flowing and
SEND when a PIN number is being set.
FCN display Pressing the FCN key from the active state displays the list of six
predefined fixed function keys that emulate the fixed keys on the 5220 IP
phone. Additionally, up to 13 programmable keys that are not on the
LINE list may be displayed and up to 12 keys defined by an OAI server.
The programmable key items that appear on this list each have a state
indicator in the second column of the display that shows a plus sign if the
associated feature is active. This second column is blank if the associated
feature is not active. The plus sign emulates a lit or blinking LED on a
deskset.
PN: 72-1084-02-D.doc Page 14