Targus netlink e340 - Manual (Page 31)

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
7.2 Feature Access
In its standby state, the Wireless Telephone displays the extension assigned to this
Wireless Telephone. The active state is initiated by pressing either the
Start Call key or
the MENU key. When the active state is initiated, the Wireless Telephone contacts the
PBX and displays the data provided – the time, date, default line icon, any voicemail
icon, and softkey and feature key labels. If the
Start Call key has been pressed, the
Wireless Telephone is off-hook and there is a dial tone. If the MENU key is pressed, there
is no dial tone; pressing MENU again will bring up the Menu display.
While in the active state, you may switch to any display – Line, Feature, or Menu – by
pressing its corresponding key. Pressing a softkey will activate the feature displayed.

The Wireless Telephone emulates the operation of the 5220 IP Phone
including: superkey, local muting, timed reminder, ringer adjust (via
superkey), forwarding (via superkey), hot desk, auto answer (via
superkey), and resiliency. Some or all of these features may be
implemented locally.
Line Appearances
While off hook, press the LINE key to view the shortcut keys and assigned extensions for
line appearances. There are nine possible line appearances that correspond to the nine
indicators at the top of the Wireless Telephone display. When a line is in use, the
indicator converts to the line number and a + will appear after the shortcut key on the list,
emulating a lit LED. Press the
LINE key again to display the second page of the list if
more than four line keys have been programmed. To use an extension, press the
corresponding shortcut key. You may also use the
Up , Down , and Select side buttons to
scroll through the displays and activate the line appearances on this list. Up and down
arrows on the display indicate additional items may be viewed by using the side buttons.
Press the
End Call key to exit the Line Appearance list.
Menu Display
The softkey labels on the Wireless Telephone are truncated to four characters. The
complete text for each softkey may be displayed by pressing the
MENU key from the
standby state. The shortcut key assigned to the softkey feature and the complete text for
each of the softkeys displays.
Activate the softkey features while in the Menu display by pressing the softkey, pressing
the shortcut key, or using the
Up , Down , and Select side buttons to scroll through and
activate the features on this list. Up and down arrows on the display indicate additional
items may be viewed by using the side buttons. Press the
End Call key to exit the Menu
display.
Feature List
The 5220 IP Phone has several fixed feature keys. The NetLink implementation supports
five fixed features that are suitable to a mobile user through the Function (
FCN ) key on
the Wireless Telephone. When FCN is pressed, the display lists the first four fixed
features and the assigned shortcut key. Pressing FCN repeatedly will display the
PN: 72-1084-02-D.doc Page 31