Targus netlink e340 - Manual (Page 24)

SpectraLink Corporation Setup and Administration—NetLink e340/i640 Wireless Telephone
Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation
Noise Mode Select Noise Mode to adjust the Wireless Telephone for background
noise. Select Normal : for most office environments; High : for moderate
background noise; or Severe : for extremely noisy conditions. Use of the
non-Normal modes is not recommended unless you are in a loud
environment or you may find it difficult to be heard on your Wireless
Telephone.
Alias IP Addr This option displays the IP address currently used for this Wireless
Telephone by the SVP Server for communications with the call server.
Current IP
Addr
This option displays the IP address currently assigned to the Wireless
Telephone. The IP address is not set here; it is merely displayed and may
not be changed.
Extension This option allows you to enter the user extension for this Wireless
Telephone. This number is for display purposes only; entering it does
not assign the extension in the host telephone system.
Mitel options This option displays the ports being utilized for receiving data at the
Wireless Telephone.
Push-to-talk This option displays the menu for the two way radio feature in the
NetLink i640 Wireless Telephone. The
Channel option allows you to
select a channel 1-8 to send and receive radio messages. The
Enable/Disable option allows you to enable or disable the radio feature.
See the NetLink i640 Wireless Telephone end-user document for more
information about push-to-talk.
(Additional options may be present. Contact your system administrator for information.)
PN: 72-1084-02-D.doc Page 24