Tonino Lamborghini OperationGuide MDR24/96 - Manual (Page 25)

61
Operation Guide
Oper
a
tion
Guide
Appendix F: Networking (FTP) Setup
The MDR24/96 comes to you with a handy 10/100 Base-T local area network
(LAN) card built in. The main purpose of networking the MDR24/96 using
Ethernet is to share or back up project files to a computer, network server/router,
or other device with an Ethernet connection and common protocol. It can also be
used to transfer files to a computer for editing.
The topic of computer networking can get very complex and we can’t give you a
complete course here. This appendix covers the basics for configuring a small,
directly connected peer-to-peer network consisting only of one MDR24/96 and one
computer, with some side notes about integrating with a small local area network.
If you’re connecting to a larger network, for instance in a corporate workgroup
environment, you probably have a network administrator who can integrate your
MDR24/96 using the information presented here.
VERY IMPORTANT: You really CAN connect your MDR24/96 to the Internet.
This means that others who discover your recorder’s address can access, add, and
even delete files on your recorder. Hackers have programs that search systems on
The Net for audio files in hopes of finding a pre-release copy of the Next Big Hit.
You may not want that much free publicity. If you want to use the Internet to share
files with a production partner or client, be aware of the risks.
Disclaimer: Sorry, Mackie Designs cannot offer the service or knowledge that you
might personally need on the broad and seemingly complex issue of networking
security. Please seek guidance from professional computer service types.
The two most popular methods of networking in the PC environment are:
♦ Peer To Peer – Usually used when only two computers are connected
together. This configuration is described in detail here.
♦ Server/Router Network – One or more computers connected to a network
server or router with a connection hub. You may need to consult other
references in order to integrate your MDR24/96 in a larger network, using
the information provided here.
Peer-to-Peer Networking
Required Cables and Hardware
♦ A peer-to-peer network consists of two computers. One computer is the
MDR24/96, referred to as System #1.
♦ The other computer, System #2, is the one with which you wish to share
files, most likely an audio workstation in your studio.
♦ The MDR24/96 is equipped with a 100 Base-T Ethernet interface.
System #2 must have a 100 Base-T network card installed.
♦ The two Ethernet interfaces are connected using industry standard CAT-5
Ethernet cable and connectors.
IMPORTANT: A CROSSOVER cable is required. Since we’re connecting two
Ethernet ports together directly with no intervening network interfacing or routing
devices, a standard Ethernet cable will not work!
When cable shopping, look for one marked “Crossover” or “Reversed”. This is a
special cable wired with input and output connections crossed over from one end
to the other, so data sent by one system appears at the receiver input of the other.