Teledyne Trace Oxygen Analyzer 3000TA - Manual (Page 3)

Model 3000TA Quickstart Guide
Teledyne Analytical Instruments 3
GETTING STARTED
This Quickstart Guide is designed to get you set up and operating your Teledyne Analytical
Instruments Analyzer quickly. It shortcuts the details so you can install and use your new
analyzer with a minimum of fuss. This Quickstart Guide should be used in conjunction with the
Instruction Manual that shipped with your instrument. Only necessary features to get you
operational are discussed in this guide. Many of the advanced features of this analyzer are not
described here so you should refer to the Instruction Manual to get the most from your analyzer
Front Panel (Operator Interface)
Take a minute to familiarize yourself with the analyzer’s interface. The standard 3000TA is
housed in a rugged metal case with all controls and displays accessible from the front panel. The
operator interface consists of thirteen buttons for operating the analyzer, a digital meter, an
alphanumeric display, and a window for viewing the sample flowmeter.
Function Keys:
Six touch-sensitive membrane switches
are used to change the specific function
performed by the analyzer:
•
Analyze Perform analysis for
oxygen content of a
sample gas.
•
System Perform system-
related tasks
(described in detail
in chapter 4,
Operation.).
•
Span Span calibrate the analyzer.
•
Zero Zero calibrate the analyzer.
•
Alarms Set the alarm setpoints and attributes.
•
Range Set up the 3 user definable ranges for the instrument.
Data Entry Keys:
Six touch-sensitive membrane switches are used to input data to the instrument via the
alphanumeric VFD display: