Toastmaster 1750 - Manual (Page 7)

6. All-In-One Food Preparation System Use and Care Guide
Instructions for Use
CAUTION: Always unplug blender body from outlet before installing
or removing attachments.
The blender body may be connected to the blending stick, the mixer
attachment head, the high speed chopper drive or low speed chopper
drive.
Using the Blending Stick
Use the blending stick to blend liquids, eggs, batters or drinks.
1. Place the blender body over the
blending stick and carefully push
down until it “clicks” into place.
Gently turn the blender body at the
same time if necessary.
2. Place ingredients into the
mixing/measuring beaker, container,
bowl or pan which is sufficiently tall to
avoid splashing.
3. Plug the blender body into a standard
120V AC electrical outlet.
4. Dip the blending stick as deeply as
possible into the container and turn
on the blender body by pressing down
on one of the speed control buttons.
Do not turn blender body on before
inserting into container as this may cause splashing.
NOTE: Do not immerse the blending stick in food or liquid above
the maximum indicator line.
5. When using the blending stick, work through the ingredients with
a gentle up and down movement of the blender body.
6. When blending task is complete, release the speed control button
and remove plug from electrical outlet.
7. Carefully remove the blending stick by pushing down on release
button.
8. Clean unit and attachments as instructed in “User Maintenance
Instructions.”
Speed
Control
Buttons
Blender
Body
Release
Button
Blending
Stick
Figure 1
TMR_1750&CAN_IB_18-11-04 11/18/04 11:49 PM Page 6