Toastmaster 1750 - Manual (Page 8)

7.
Using The Mixer Attachment Head
Use the stainless steel beaters for general mixing needs, such as
preparing cake and cookie batters or to mash potatoes. Use the
stainless steel whisk for whisking foods such as egg whites and sauces.
Use the stainless steel dough hooks for kneading yeast breads.
NOTE: When using these accessories, do not operate the appliance
for more than three minutes at a time, after which appliance should
be allowed to cool down. These accessories are for light duty mixing
only.
1. Place the blender body over the
mixer attachment head and
carefully push down until it
“clicks” into place. Gently turn at
the same time if necessary.
2. Push the desired attachment stem
into mixer attachment head and
rotate until it locks into position.
The attachment will fit snugly into
the hole.
NOTE: The stainless steel dough
hooks must be attached only one way.
The dough hook with the metal washer-ring on the stem must be
inserted into the larger hole of the mixer attachment head. See
Figure 2.
NOTE:
The stainless steel wire whisk may be inserted into either
hole, and the stainless steel beaters may be placed into either hole.
3. After installing attachment(s), gently tug each attachment stem to
be sure it is secure.
CAUTION: Use either both beaters or both dough hooks. Do not
attempt to switch out dough hooks, beaters or wire whisk. This could
damage the food preparation system.
4. Plug the blender body into a standard 120V AC electrical outlet.
5. Hold the unit firmly and press the desired high or low speed
control button.
Dough
Hook
Washer-
Ring
Larger Hole
Opening
Figure 2
Mixer
Attachment
Head
Speed Task / Procedure
I Blend liquid ingredients together
I Stir dry ingredients into liquids, instant puddings
II Mix cake mixes and batters
II Cream sugar and butter
II Whip egg whites, whipping cream or potatoes
Mixer/Blending Guide
TMR_1750&CAN_IB_18-11-04 11/18/04 11:49 PM Page 7