Toshiba CTX IPT/DKT - Manual (Page 55)

Advanced Operation
Alarm Notification Button
Strata CIX and CTX IPT/DKT Telephone 08/07
37
Alarm Notification Button
The Alarm Notification Button must be setup by your System Administrator on your
station.
When the Alarm Notification button displays
Call your System Administrator or Dealer.
This button stops displaying when the alarm clears or when you press the flashing
button. If the alarm has not been cleared the Alarm Notification Button starts flashing
every 10 minutes.
Automatic Busy Redial
After reaching a busy outside number, you can activate Automatic Busy Redial so that
the system automatically redials the number at regular intervals. The system repeats
the redial until the destination is no longer busy. This feature may not be on some
telephones on your system.
Automatic Busy Redial is not attempted while your station is busy, but continues to
time-out. The system inserts a pause (P) on your LCD before redialing the number.
To activate Automatic Busy Redial
1. When you reach a busy number, press
Auto Busy Redial
or
Cnf/Trn
+
#441
.
The LED flashes red. You hear confirmation tone.
2. Hang up or press
Spkr
. The system redials, up to five to 20 times, every 30 to 180
seconds (depending on system programming). Your telephone receives ring tone
when Automatic Busy Redial dials the number and it is available. The extension
and Spkr LEDs flash green.
3. Lift the handset or press
Spkr
and wait for the party to answer. If you do not pick
up the handset or press
Spkr
within recall timeout (five to 60 seconds) after a
connection is made, you hear a muted ring for another 30 seconds, then the call
disconnects.
To cancel Automatic Busy Redial
Press
Auto Busy Redial
or extension +
#442
.