Monitor back cover – TANDBERG Video Conferencing System 7000 User Manual
Page 18
Advertising
18
TANDBERG Videoconferencing System
Installation
Figure 7
Figure 8
When everything is mounted correctly, the TANDBERG 7000
should look like shown in Figure 8.
Monitor back cover
Make sure that all cables are connected and then lead them down through the cable duct on the back side of the
column. Slide the duct cover of the column into place. Make sure that all cables come out at the bottom of the
column without being squeezed by the duct cover.
The monitor back cover is kept in place by magnets. Place the cover against the magnetic points on the monitor
frame as shown in Figure 7.
T
HE
FRONT
COVER
OF
THE
MONITOR
FRAME
IS
MADE
OF
PLASTIC
AND
SHOULD
BE
TREATED
WITH
CARE
.
NOTE
Duct cover
Advertising