Vga settings – TANDBERG Video Conferencing System 7000 User Manual
Page 71
TANDBERG Videoconferencing System
71
Advanced use
VGA Settings
VGA Out
To enhance the local video quality, a VGA monitor may be connected.
Main:
Should be used if you want to use a VGA monitor as your main monitor. Video outputs 1 and 3 will
be disabled.
Dual:
Should be used if you want to use a VGA monitor as your dual monitor. Video outputs 2 and 4 will
be disabled.
Loop:
Should be used if you want to use a TV monitor as your main monitor.
VGA Out Quality
VGA Out Quality changes the resolution of the VGA signal available on the ‘VGA Out’ connector at the rear of the
codec.
I
F
YOU
SET
‘VGA O
UT
’
TO
‘M
AIN
’,
MAKE
SURE
YOU
HAVE
A
VGA-
MONITOR
CONNECTED
TO
THE
VGA-
OUTPUT
ON
THE
SYSTEM
. I
F
YOU
DO
NOT
HAVE
A
VGA-
MONITOR
CONNECTED
,
YOU
WILL
NOT
BE
ABLE
TO
SEE
THE
MENU
SYSTEM
!
NOTE
I
CIF
WILL
NOT
BE
AVAILABLE
WHEN
VGA O
UT
IS
M
AIN
OR
D
UAL
.
NOTE
Auto:
Will sense the resolution on the ‘VGA input’ port and use the same resolution on the ‘VGA Out’ port.
VGA:
Will force ‘VGA out’ to VGA(640X480).
SVGA: Will force ‘VGA out’ to SVGA(800X600).
XGA:
Will force ‘VGA out’ to XGA(1024X768).