TANDBERG Video Conferencing System 7000 - Manual (Page 32)

32
TANDBERG Videoconferencing System General use
move pip
General use
Adjusting volume
Press the V OLUME keys to adjust the volume level. An on-screen indicator will show the current level.
View outgoing video (selfview)
Press the S ELFVIEW key to view your outgoing video.
To change the image being viewed on the monitor during a call press S ELFVIEW until the desired
image is shown (far end/selfview/still image or Duo Video).
Press M OVE PIP to move your selfview as a Picture-in-Picture to different corners of the screen or to
switch it off.
+
-
selfview
mic off
Microphone on/off
To mute your microphone during a call, press M IC O FF . An on screen indicator will appear when the
microphone is off. In a call, if audio is detected, the on-screen symbol will start to flash. Pressing M
IC
O
FF
one more time will activate the microphone again.
M IC O FF WILL MUTE AUDIO INPUTS M IC 1-3 AND A UDIO 4. I T WILL NOT MUTE AUDIO FROM THE AUX AND VCR INPUTS . NOTE