TANDBERG Video Conferencing System 7000 - Manual (Page 43)

TANDBERG Videoconferencing System
43
General use
MultiSite cascading
By connecting four MultiSite systems together, it is possible to connect up to 10 video sites (including the four
MultiSite sites) plus 4 audio sites (telephones), see drawing below.
The host can connect up to 3 other video systems with MultiSite functionality. The host can use Voice Switched
or Continuous Presence mode.
The cascaded systems connect to two other video sites plus one audio site each. These systems will
automatically run Voice Switched mode and transmit a full screen image to the host.
Establishing MultiSite meetings using Directory
It is possible to pre-define meetings using the Directory. All sites will then be connected automatically instead of
having to add sites one by one.
• Press D IRECTORY .
• Highlight a MultiSite entry and press C
ONNECT
.
See ‘Directory’ section for further information.
A LL CONNECTIONS CAN BE ANY COMBINATION OF ISDN/IP. NOTE