TP-Link TL-SF2226P - Manual (Page 11)

TL-SF2226P+/TL-SL2226P+ Remote Smart Switch User Guide
Chapter 5: Installation and the Usage of the Remote
Management Software
The TL-SF2226P+/TL-SL2226P+ is a smart switch, you can configure it with the remote
Management software shipped with the switch, It’s very convenient for you to manage
the switch. After install the software under windows OS, you can manage several
switches at the same time.
Caution: Between the remote management software and the telnet management
described in the next chapter, you can only choose one to manage the switch.
5.1 Steps of Installation of the Remote Management Software
—SSU
1) Installation requirement: Windows OS, Supporting TCP/IP Protocol.
2)
Installation steps: Run the setup.exe, and following the wizard to finish the setup. If
you want to change the default path, click Browse, Input or choose the path you
want, click OK and then next to finish the setup. As figure 5-1.
Figure 5-1
5.2 Usage of Remote Configuration Software -- SSU
The interface of SSU application is friendly and easy to use. Generally speaking, there
- 8 -