TP-Link TL-SF2226P - Manual (Page 8)

TL-SF2226P+/TL-SL2226P+ Remote Smart Switch User Guide
Figure 3-2 The view of mounting the TL-SF2226P+ in the rack
3.3 Power On
The TL-SF2226P+/TL-SL2226P+ can be used with the power source in the range of 100
to 240 VAC, 50 to 60Hz.
The internal power system of the TL-SF2226P+/TL-SL2226P+ can automatically adjust
the operating power according to the power input. The POWER LED will be light when
power on.
3.4 Initialization
Turn on the power, the switch will automatically initialize and the LEDs will be light as
follows:
At the time you turn on the power, if the LEDs of slot1 and slot2 on the front panel are
light, which means there are two module cards in slot1 and slot2. The LEDs of Port 1- 24
will turn out after two seconds that indicates the system is resetting. The CUP LED
flashing means the switch starts to work in good condition.
Caution: As a precaution in the event of a power failure, unplug the switch. When the
power resumed, plug the switch back in.
All the pictures are based on the TL-SF2226P+ in the manual. The pictures of
TL-SL2226P+ are almost the same as TL-SF2226P+.
- 5 -