Chapter6 telnet/out-of-band management, 1 introduction, 2 how to connect out-of-band – TP-Link TL-SF2226P User Manual
Page 25: 1 introduction 6.2 how to connect out-of-band
TL-SF2226P+/TL-SL2226P+
Remote Smart Switch User Guide
Chapter6 TELNET/Out-of-Band Management
6.1 Introduction
Through TELNET you can realize Remote Log in to manage the Switch. Out-of-Band
Management manages the switch locally through the console port, without occupying the
bandwidth.
Though TELNET and Out-of-Band have different presentation, their management
contents are the same, both of them can be used to configure the switch's characters.
Caution:
Out-of-Band management and remote management (SSU management and
TELNET management) can log into the switch at the same time, the last change will be
saved in the switch. SSU management and TELNET management can not log in to
manage the switch at the same time.
6.2 How to connect Out-of-Band
Out-of-Band Management needs a terminal or a HyperTerminal.
First, connect the switch and the PC by the console cord. Then, run HyperTerminal.
Refer to the following figure to configure the HyperTerminal.
- 22 -