TP-Link TL-WR641G - Manual (Page 26)

TL-WR641G 108M Wireless Router User Guide
Click the Save button to save your settings.
Note : 1) Only the PC(s) on your LAN can use the MAC Address Clone feature.
2) If you click the Save button, the router will prompt you to reboot.
5.5 Wireless
Figure 5-9 Wireless menu
There are three submenus under the Wireless menu (shown in figure 5-9): Wireless
Settings
, MAC Filtering and Wireless Statistics. Click any of them, and you will be
able to configure the corresponding function. The detailed explanations for each
submenu are provided below.
5.5.1 Wireless Settings
The basic settings for the wireless network are set on this page, figure 5-10:
Figure 5-10 Wireless Settings
SSID - Enter a value of up to 32 characters. The same name (SSID) must be
assigned to all wireless devices in your network. The default SSID is TP-LINK, but
it is recommended strongly that you change your networks name (SSID) to a
- 20 -