2 port triggering – TP-Link TL-WR641G User Manual

Page 36

Advertising
background image

TL-WR641G

108M Wireless Router User Guide

Enable

- The Enable checkbox to enable the virtual server entry.

Common Service Port

– Some common services already list in the pull-down list.

To setup a virtual server entry:
1. Select the service you want to use from the Common Service Port list, and select

the ID you want to use, and click Copy to button. If the Common Service Port list
does not have the service that you want to use, type the number of the service port
or service port range in the Service Port box.

2. Type the IP Address of the computer in the Server IP Address box.
3. Select the protocol used for this application, either TCP,UDP, or All.
4. Select

the

Enable

checkbox to enable the virtual server.

5. Click

the

Save

button.

Note:

It is possible that you have a computer or server that has more than one type of

available service. If so, select another service, and enter the same IP Address for that
computer or server.

To modify a virtual server entry:
1. Select the entry you want to modify.
2. Modify the information from the Service Port, the IP Address boxes, and the

Protocol

pull-down list.

3. Click

the

Save

button.

To delete a service entry:
1. Clear the entry's all information except the Protocol pull-down list.
2. Click

the

Save

button.

To delete all service entries:
1. Click

the

Clear All

button.

2. Click

the

Save

button

Click the Next button to go to the next page and Click the Previous button to return the
previous page.

Note

: If you set the virtual server of service port as 80, you must set the web

management port on Security –> Remote Management page to be any value except
80 such as 8080. Or else there will be a conflict to disable the virtual server.

5.7.2 Port Triggering

Some applications require multiple connections, like Internet games, video
conferencing, Internet calling and so on. These applications cannot work with a pure
NAT router. Port Triggering is used for some of these applications that can work with an
NAT router. You can set up Port Triggering on this page shown in figure 5-20:

- 30 -

Advertising