TP-Link TL-WR641G - Manual (Page 28)

TL-WR641G 108M Wireless Router User Guide
Hexadecimal format stands for any combination of hexadecimal digits (0-9, a-f, A-F)
in the specified length.
WEP Key settings - Select which of the four keys will be used and enter the
matching WEP key information for your network in the selected key radio button.
These values must be identical on all wireless stations in your network.
Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit) for
encryption. "Disabled" means the WEP key entry is invalid.
•
For 64-bit encryption - You can enter 10 hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII characters.
• For 128-bit encryption - You can enter 26 hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII characters.
• For 152-bit encryption - You can enter 32 hexadecimal digits (any combination
of 0-9, a-f, A-F, zero key is not permitted) or 16 ASCII characters.
Encryption - When you select WPA-PSK or WPA for Authentication Type you
can select either Automatic, or TKIP or AES for as Encryption.
Figure 5-10a WPA-PSK
WPA-PSK Passphrase - You can enter a WPA passphrase between 8 and 63
characters long.
Group Key Update Period - Specify the group key update interval in seconds. The
value can be either 0 second or from 30 seconds or up, 1-29 seconds is not a
usable second. Enter 0 to disable the update.
Figure 5-10b WPA
Radius Server IP -
Enter the IP address of the Radius Server
Radius Port -
Enter the port that radius service used.
Radius Password -
Enter the password for the Radius Server.
Be sure to click the Save button to save your settings on this page.
Note
: The router will reboot automatically after you click save.
5.5.2 MAC Filtering
The Wireless MAC address Filtering for wireless networks are set on this page, figure
5-11:
- 22 -