TP-Link TL-WR641G - Manual (Page 52)

TL-WR641G 108M Wireless Router User Guide
router.
Figure 5-39 Restore Factory Default
Click the Restore button to reset all configuration settings to their default values.
• The default User Name: admin
• The default Password: admin
• The default IP Address: 192.168.1.1
• The default Subnet Mask: 255.255.255.0
Note : Any settings you have saved will be lost when the default settings are restored.
5.11.3 Reboot
This page (shown in figure 5-40) allows you to reboot the router.
Figure 5-40 Reboot the router
Click the Reboot button to reboot the router.
Some settings of the router will take effect only after rebooting, which include:
• Change LAN IP Address. (System will reboot automatically)
• MAC Clone (system will reboot automatically)
• DHCP service function.
• Static address assignment of DHCP server.
• Web Service Port of the router.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router's settings to factory default (system will reboot
automatically).
5.11.4 Password
This page (shown in figure 5-41) allows you to change the factory default user name and
password of the router.
- 46 -