TP-Link TL-WR941N - Manual (Page 31)

TL-WR941N/TL-WR941ND Wireless N Router
- 26 -
4.5.3 MAC Clone
Choose menu “Network→MAC Clone”, you can configure the MAC address of the WAN on the
screen below, Figure 4-10:
Figure 4-10 MAC Address Clone
Some ISPs require that you register the MAC Address of your adapter. Changes are rarely
needed here.
¾ WAN MAC Address - This field displays the current MAC address of the WAN port. If your
ISP requires you to register the MAC address, please enter the correct MAC address into
this field in XX-XX-XX-XX-XX-XX format(X is any hexadecimal digit).
¾ Your PC's MAC Address - This field displays the MAC address of the PC that is managing
the router. If the MAC address is required, you can click the Clone MAC Address To button
and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click the Save button to save your settings.
)
Note:
Only the PC on your LAN can use the MAC Address Clone function.
4.6 Wireless
Figure 4-11 Wireless menu
There are four submenus under the Wireless menu (shown in Figure 4-11): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced and Wireless Statistics. Click