TP-Link TL-WR941N - Manual (Page 58)

TL-WR941N/TL-WR941ND Wireless N Router
- 53 -
4.12 System Tools
Figure 4-41 The System Tools menu
Choose menu “System Tools”, you can see the submenus under the main menu: Time Settings,
Firmware, Factory Defaults, Backup & Restore, Reboot, Password, System Log, Remote
Management and Statistics. Click any of them, and you will be able to configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.12.1 Time Setting
Choose menu “System Tools→Time Setting”, you can configure the time on the following
screen.
Figure 4-42 Time settings
¾ Time Zone - Select your local time zone from this pull down list.
¾ Date - Enter your local date in MM/DD/YY into the right blanks.
¾ Time - Enter your local time in HH/MM/SS into the right blanks.
¾ NTP Server Prior - Enter the address for the NTP Server, then the Router will get the time
from the NTP Server preferentially. In addition, the Router built-in some common NTP
Servers, so it can get time automatically once it connects the Internet.
To configure the system manually:
1. Select your local time zone.
2. Enter date and time in the right blanks.