TP-Link TL-WR941N User Manual
Page 51
TL-WR941N/TL-WR941ND
Wireless N Router
- 46 -
your local network during the time of 1800 to 2200; And wish to make the PCs with IP addresses
192.168.1.8 to 192.168.1.12 unable to visit the website of IP address 202.96.134.12 all the day,
while other PCs have no limit. You can configure the rules as follows.
1. Enable the “Firewall” and “IP Address Filtering” on the Firewall screen (show in Figure 4-31),
and then, you should select the Default IP Address Filtering Rule "Allow the packets not
specified by any filtering rules to pass through the router".
2. Click
Add New…/Modify shown in Figure 4-32, you will see a new screen shown in Figure
4-33. Enter the “Effective time” for the rule to take effect.
Figure 4-33
3. Enter the “LAN IP Address”, “LAN Port”, “WAN IP Address” and “WAN Port” in the
corresponding field.
4. Select the “Protocol”, “Action” and “Status” for the rule as shown in the Figure 4-33
5. Click
the
Save button to save this entry.
6. Go
to
Step 2 to complete the other rules continually.
After you finish the configurations, you will see the rules in the table below: