Trango Broadband M2400S - Manual (Page 49)

Trango Broadband Wireless — User Manual M2400S Rev. A Page 45
LO stability: +/- 2.5 ppm PLL stabilized over temperature
Ethernet I/O Specifications
Data Input/Output:
Connector:
Shielded RJ-45 Jack
Signaling Format: IEEE802.3i (10baseT) and IEEE802.3u (100baseT) compliant
Filtering: PPPoE per RFC 2516 (SU only)
Auto-Negotiation: Fully supports IEEE802.3-2002 Sect. 2 Clause 28
Bridging Frame Size: 60 to 1600 bytes
Mngmt Frames: 60 to 1472 bytes. (includes PING, TELNET, TFTP, HTTP)
Protection:
Bi-directional transient voltage protection diodes on all data lines
compliance with:
IEC61000-4-2 (ESD)
IEC61000-4-4 (EFT)
IEC61000-4-5 (Lightning)
Power Specifications
Input Voltage:
Input voltage range at unit is 10.5 VDC to 24 VDC max
Power is supplied via unused pins of the RJ-45 Jack. Power is
injected into Ethernet cable using a junction box (J-Box) provided.
Current Cons.:
500 mA in transmit and receive modes at max power using 20 V
standard adapter (10 W) and 10 ft cable from J-Box to unit
Protection:
28 volt Transient Voltage Suppression (TVS) diode on power input
Note: Voltages above 28 volts will cause damage to unit.
Mechanical and Environmental Specifications
General
Material:
High temp polycarbonate radome and diecast metal enclosure
Size: 12.5” x 8” x 2.75” including mounting studs
Weight: 4 lb
Mounting: 2 U-Brackets, all-thread rod, nuts and washers
Connectors/Indicators
RF
Output: Integral internal patch antenna per Part 15C, 15.203
External RP-SMA-f connector for external antenna
FCC Compliance: The transceiver complies with the following:
FCC Part 15.247
FCC Part 15.207(a)
Environmental
Operating Temp:
-40 to 60 deg C
Storage: -40 to 85 deg C
Humidity: 100 % when sealed properly
NEMA Rating: NEMA 4
Shock:
Sustain 3 axis drop from 5 feet
Standard External Power Supply
20 Volt DC Power adapter and J-Box supplied with product.