Trango Broadband M2400S - Manual (Page 7)

Hardware Overview
Trango Broadband Wireless — User Manual M2400S Rev. A Page 3
Section 2 Hardware Overview
This section provides detail about each radio in the M2400S family. Each radio in the M2400S family includes a
built-in, electronically switchable, dual-polarized antenna, as well as a reverse polarity SMA connector for the
attachment of an external antenna. For ease of installation all units are designed for outdoor installation and
powered by power-over-Ethernet (POE). The M2400S Access Point and Subscriber Units provide channels of
operation within the 2400 MHz ISM band, which spans from 2400 MHz to 2483 MHz. Default channel spacing is
10 MHz, allowing for 8 non-overlapping channels.
M2400S AP and SU Hardware Components
Each radio comes equipped with, a power-over-Ethernet (PoE) J-Box, an AC adapter, and mounting hardware.
Radio (AP or SU) antenna
Power Supply (120 VAC-20 VDC)
J-Box (Power-over-Ethernet Injector)
Mounting Hardware
4X
8X
2X
Figure 2: Basic Components of an M2400S Radio
Figure 3: Bottom of Radio
At the bottom of the M2400S are two access ports: a twist-on weatherproof cable port for RJ-45 Ethernet (and
PoE), and a translucent access cover plug over the unit’s diagnostic LEDs and reset button. The LEDs will be
discussed later in this text.