Teka AUTOMATIC DRUM WASHING MACHINE LSE-1200 S - Manual (Page 11)

F drying button
Press this button and the drying icon of the display screen brightens.When the
program finally comes to the drying process,the drying icon twinkles,indicating the
start of the drying program.If you want to cancel the program,press the start/pause
button before the program comes to the end of the drying process.Press the drying
button again and the drying function is canceled while the drying icon extinguishes.
G super-clean rinse button
Press this button and the super-clean rinse icon of the display screen brightens.Before
the program comes to the softening process,the machine will automatically add one
more rinse program.At the same time the super-clean rinse icon twinkles until the
super-clean rinse program comes to an end.The program continues until the end.
H pre-washing button
In room dirty clothes are to be washed,press down this button before the start of the program and
the pre-washing icon of the display screenbrightens.After starting the washing machine,the pre-
washing program is the first to be operated.At this time the pre-washing icon twinkles and there is
water inflow in room1of detergent-dispersing package.At the end of the pre-washing program,the
pre-washing icon extinguishes and other programs begin to operate.
I Reservation button
Press down the reservation button when needed before the program starts.The default time is 9
hours.Each time the button is pressed the default time increases by30minutes.If the button is
pressed continuously,the default time can be accumulated.It cycles from 0 hour to 24 hours until
you stop pressing the button.After setting the reservation time,the reservation icon brightens and it
won’t extinguish until the end of the reservation program.The reservation time includes the period
from the operation of the program till it send.Therefore,the preset reservation time should be at
least longer than the time span of the operation of the program,orelse the program won’t perform
the reservation function and goes directly to the washing process.
J Display screen
The remaining time of the washing process,the set temperature and speed,the additional functions
as well as the warning message are to be shown on the display screen.For details please refer to
the introduction of the display screen.
K Detergent-dispersing package
Open the detergent-dispersing package and you will see 3 little rooms fordetergent:
Room1:If pre-washing function is needed,put detergent in this room.Otherwise,
no detergent should be put in here.
Room2:When washing in the first 6 programs,put detergent in this room whether
a pre-washing program is needed or not.
Room3:Put some softener,conditioner or spice in this room to soften or do other treatment to ward
the clothes.
D+1 Keyboard lock button
After starting the program,press down the reservation button and the start/pause button
simultaneously for 3 seconds and the keyboard lock function will be started.At this time the digital
area shows “SAFEON”.Press the buttons again for 3 seconds and the function is canceled.And the
digital area shows “SAFEOFF”.This function is set for fear of outside intrusion in the operation of
the program.For example,if children press the functional or program buttons out of curiosity,it will
do affect the washing program or even interrupt the program.
Note:if the keyboard lock is started when the program is in operation,the keyboard lock function
will be canceled automatically at the end of the program when it shows “End”.
Note:In the washing process,if the keyboard lock is not started,turn the program button to the off
position of the machine and the current program will be canceled.Turn the program button again to
choose a new program.
Control Panel Flexible Applications
Saving water,electric power and detergent is not only good for
environment protection but also good for saving the disbursements.
If you wash many clothes together,please separate the clothes that are easy to lose color.
For some extremely dirty clothes,please pre-wash them before put them together with the other.
For some clothes that are not very dirty,you can relevantly reduce the volume of
detergent or choose the fast-washing program.
Choosing proper temperature:only choose the temperature above 60in the Room
of the clothes are too dirty.
Using properamount of detergent:don’t use over much detergent;otherwise it will not
only cause environmental pollution but also difficulties in rinsing.
Using softener:the clothes will be soft for ironing and can save your time.
Adding the clothing amendment can not only make the clothes soft but also can
eliminate electrostatic bonding so that the clothes are prone to be ironed.
This machine consists of recyclable materials,in order to protect environment,when
discard it please help dispose properly or recycle and reuseit.
Drying
It depends on the texture of the clothes that whether can be dried or not.
Before the process of drying please make sure the water valve has been turned on,
and make sure the water is cold.
The dehydrated clothes should be taken out from the roller,untangled and put into the
roller again before the process of separate drying.
In order to ensure the effect of drying,please dry the clothes after dehydrating process.
If too many clothes were put into the roller for drying,the drying effect will be impacted
and further more the clothes are prone to be wrinkled.
For the large piece of clothes,it is better to put into the roller less than two pieces once.
The following table indicates different drying times for different kinds and quantities of
the clothes.You can choose the correspondent drying program according to the
weight of the clothes and your expected degree of drying;when the drying process is
finished the whole program will close automatically.
Weight Set drying program
Drying
Totally drying
Degree of drying Left time(min)
Ironing
Anti-virus
Totally drying or ready for ironing
Anti-virus program
for dry clothes
Notice:If the quantity of the clothes exceeds the standard volume or mix with the other
clothes when washed,it will take a longer drying time(left time will cease to change).If
it is not dried sufficiently you can use the spin program for another drying process.