Teka AUTOMATIC DRUM WASHING MACHINE LSE-1200 S - Manual (Page 7)

Maintenance
5. Rinse intake pipe joint and the inlet valve gauze filter
frequently in case foreign substances in water blocks
the water pipe connection.
6. Reinstall the shakeproof components that are dismantled when moving
the house(including bolt,gum sleeve,shakeproof cell type basin,etc.)
according to the following direction. Tighten the inner components in
case they are shaken and destroyed.
Dismantlethe cover plate
in the back and take down
3 splash shield plastic plugs.
Fit on the shakeproof
cell type steel,and insert
the packaging screw.
Fix the rubber sleeving to
the packaging screw from
the interior of the rear cover plate.
Tighten the packaging
screw with a spanner.
Screw tight the rear cover plate.
7. When the equipment has not been used for a long time,
disconnect the power supply and turn off the tap. Keep the
door of the machine open to let out the smell. If the machine
is not in use temporarily, keep the door slightly open.
Remove all the packing materials (including the
EPS base)to prevent vibration during use, as
shown in the right picture.Upon opening of the
package, water drops may be seen on the plastic
bag and the porthole. This is normal phenomenon
resulting from water test in the factory.
Fig . 1
Check attachments and materials with reference to the following
Dismantle the packing bolts as shown in Fig. 2.
The packing bolts are designed for clamping anti-vibration components
inside of the washing machine during the transportation process.
Before use:
1. Remove the back plate;
2. Remove the three packing bolts on the back plate and take out the
rubber hose;
3. Replace the back plate;
4. Fill the holes left by the packing bolts with plastic plugs.
(Attention: The packing bolts and rubber hose should be kept in a safe
place for later use)
Fig.3
Adjusting the washing machine
There are adjustable feet under the bottom of the washing machine. Before
use, the washing machine should be adjusted, as shown in Fig. 3, so that it
is level.
Fig.2
Model
Qty Name Operation
manual
Operation manual
Quality
certificate
Quality certificate
Water
hose
Water hose
Drainage
holder
Drainage holder
Plastic
plugs
Plastic plugs
Installation
1 1 2 1 1 3
Warrantly
card
Warrantly card
LSE-1200 S