Unisar AC401-2P - Manual (Page 13)

Sound Lights
The Parents’ Unit features Sound Lights so you can “see” your baby’s sounds if background
noise prevents you from hearing your baby. As the sounds get louder, more lights illuminate.
Optional “Tic” Feature (See fig. 21)
When the “Tic” feature is selected, the Parents’ Unit will continuously tick
as your baby’s movement is detected by the Sensor Pad. In addition, the
“Tic” symbol will swing as it senses movement. If no movement is detected,
the ticking will stop and the swing of the symbol will stop. If you do not
want to hear the ticking, turn the “Tic” feature off.
Movement Indicators
There is a Movement Indicator on both the Nursery Unit and the Parents’ Unit. When the
Movement feature is selected, the Movement Indicator Light on the Nursery Unit will flash green
as it senses your baby’s movement. The flashing green light will let you know that movement is
being detected. This will allow you to check on your sleeping baby in the dark without disturbing her.
On the Parents’ Unit, the Movement Indicator symbol is the same as the “Tic” symbol. When the
Movement feature is selected, this symbol will appear on the LCD and will swing as it senses
your baby’s movement (see fig. 21).
Temporary Mute
If you want to temporarily mute the sound on the Parents’ Unit, press the Power button once.
The Sound symbol will flash continuously and the sound will automatically reactivate after two
minutes. To reactivate the sound before the two minutes are up, press the Power button again.
Be sure to only press the button down for one second, as pressing it for three seconds will
turn the Parents’ Unit off.
Parents’ Unit Locator
If you need to locate or page the Parents’ Unit, press the Page button located on the top of the
Nursery Unit. The Nursery Unit symbol will flash and the Parents’ Unit will continuously beep for
one minute. To stop the beep before the minute is up, press the Power button on the Parents’
Unit for one second.
Nursery Nightlight
The Nursery Unit features a soothing nightlight. Use the switch on the right to turn it on and off.
Parents’ Unit and Nursery Unit Connection
There may be times when the Parents’ Unit and Nursery Unit lose connection with each other.
However, if connection is lost, the Movement Sensor Pad will continue to monitor your baby
and the alarm will sound in the nursery. To reestablish the connection between the units, press
the Menu button on the Parents’ Unit for two seconds. The Out-of-Range symbol will flash and
a beep will sound. Then press the Page button on the top of the Nursery Unit for two seconds.
The green Movement Indicator Light will flash once, a beep will sound, and the units will
automatically reconnect. When the connection is complete, the Out-of-Range symbol will stop
flashing and the Parents’ Unit will beep once.
fig. 21
13