Unisar AC401-2P - Manual (Page 8)

CHANGING OPTIONAL FEATURE SETTINGS
The controls for all the optional features are located on the Parents’ Units. You only need to
change the settings on one Parents’ Unit as the second one will automatically change as well.
To access the optional features, press the Menu button. You can toggle through the features
by repeatedly pressing the Menu button. A flashing symbol indicates that feature can be
activated, deactivated, or adjusted by pressing the Arrow buttons and then the Select button.
The Parents’ Unit symbol will also appear when you are changing settings for the Parents’ Unit.
The Nursery Unit symbol will also appear when you are changing settings for the Nursery Unit.
NOTE: If you do not press the Select button after you have made your selection, the unit will
revert to the previous setting.
Sound, Movement, and “Tic” functions
After you press the Menu button, use the Arrow buttons to toggle between these three func-
tions until you get your desired combination. You can select one of the following five choices:
• Movement & Sound. This is the way your monitor is set from the factory.
The Movement Sensor is enabled and detects your baby’s movements.
The Sound feature is enabled so you will hear the alarm and all of your
baby’s sounds, and see sound lights. For this setting, the Sound and
Movement symbols will appear (see fig. 12).
• Movement, Sound, & “Tic.” The Movement Sensor is enabled and detects
your baby’s movements. The Sound and “Tic” features are also enabled
so you will be able to hear the alarm, your baby’s sounds, see sound
lights, and hear a ticking sound as the Sensor Pad senses your baby’s
movement. For this setting, the Sound, Movement, and “Tic” symbols
will all appear (see fig. 13).
• Sound. The Movement Sensor is disabled but you will still be able to hear
your baby’s sounds and see sound lights. Your Angelcare ® works like a
regular sound monitor when set to this function. For this setting, only the
Sound symbol will appear (see fig. 14).
• Movement. The Movement Sensor is enabled and detects your baby’s
movements. If no movement is detected, the alarm will sound on
the Nursery Unit after 20 seconds. Your baby’s sounds, the movement
alarm, and the ticking will not be transmitted to the Parents’ Unit. For
this setting, only the Movement symbol will appear (see fig. 15).
fig. 12
fig. 13
fig. 15
8
fig. 14