Uniden UBC92XLT - Manual (Page 32)

32
Special Features
BAND PLAN 2
See page 8 for how to switch the band between 1
and 2.
Chain Search Mode
Press Func + Src to start chain search mode. SRCH,
the enabled search bank number, and or
(indicating the search direction) appear. The search
bank number being searched flashes.
Press 0-9 to enable or disable the search bank
number being searched in this mode. Enabled bank
numbers appear. (Disabled bank numbers
disappear).
At least one search bank must be enabled. (The
scanner sounds an error tone if you try to disable all
the search banks). The search bank and the
frequency where chain search starts depends on
Bank
No. Frequency (MHz) Step (kHz)
1 25.0000 - 84.0100 5
2 84.0150 - 87.2550 20
3 108.0000 - 136.9875 12.5/8.33
108.0000 - 136.9916 Selectable
4 137.0000 - 143.9950 5
5 144.0000 - 145.9875 12.5
6 146.0000 - 173.9900 10, 12.5
7 406.0000 - 449.99375 6.25
8 450.0000 - 469.9900 10
9 470.0000 - 512.0000 6.25
10 806.0000 - 960.0000 12.5
UB324 Paper OM reduced size.fm Page 32 Wednesday, February 2, 2005 8:01 PM