Uniden UBC92XLT - Manual (Page 34)

34
Special Features
set the scanner to program band select mode, press
Func and PSrc. SRCH appears. Then select a
search bank.
When you select the search bank, the lower limit
and upper limit frequency assigned in the search
bank alternate on the display.
To select another search bank, press Func + PSrc
or Func + to increase the search bank number
or Func +
to decrease it. Hold down Func + or
Func + for about 1 second to quickly move
through the search bank numbers.
After choosing the search bank, follow these steps
to set the lower limit and upper limit frequency.
1. Enter the lower limit frequency by using the 0-9
and /Clr keys.
2. Press E to select the lower limit frequency.
3. Enter the upper limit frequency by using the 0-9
and /Clr keys.
4. Press E to select the upper limit frequency.
Direct Entry Search
You can use direct entry search to search up or
down from the currently displayed frequency.
1. If the scanner is scanning or searching, press
Hold.
2. Enter the frequency you want to start from by
using the number keys. (Press /Clr to enter a
decimal point).
3. Press Func + or Func + . The scanner
searches, starting from the frequency you
entered in Step 2.
UB324 Paper OM reduced size.fm Page 34 Wednesday, February 9, 2005 9:32 PM